Pdanet Broadband Driver Error

PdaNet for Windows Mobile FAQ

Jan 03, 2012  Last year we showed you how to tether your Android phone to your computer, no rooting required. The only catch was that it cost 16 now we re back.

What is required to install PdaNet. Does it support Vista.

On Windows XP/2000, PdaNet requires ActiveSync to be installed on your computer first.

PdaNet works on Vista which already has Mobile Sync built-in. However we still recommend you install the full version

of WMDC Windows Mobile Device Center from Microsoft.

Without WMDC you will need to manually copy the CE setup file to your phone during installation.

If you happen to have a 64 bit version of Vista, click here for more details.

An unlimited data plan is recommended on your phone.

How to install and setup PdaNet.

All our users agree this is one of the simplest software they have ever used -

Just download the software and run the installer on Windows, then follow on-screen instructions to

complete the installation on the computer end and the phone end. That s it. No extra setups needed.

How much does upgrade cost. Should I upgrade.

All versions purchased before 1.80 can be upgraded to 1.80 for free and we strongly recommend you doing so.

It is as simple as downloading the new version and run it on the computer.

There is a 19 upgrade charge if you upgrade to 2.0 from any previous versions. Version 2.0 has some significant improvement for Windows Mobile 6.0 phones. In particular, it adds the Proxy Mode

feature that allows the phone s radio/modem to be shared by the phone and the computer at the same time. This

improves the stability of the PdaNet connection and also allow the phone to be used for voice calls

without having to drop the PdaNet connection. Version 2.0 starts to support some phones that can not run

version 1.8 before, such as AT T Tilt, Blackjack II and some other newer Windows Mobile phones.

However if your phone runs Windows Mobile 5.0 and you have already purchased the old version, you can stay

with 1.80 without paying for upgrade. On the other hand, licenses purchased for version 2.0 will

work on any older versions of PdaNet.

See Update History for a list of changes.

What is the pricing for a site license. Do you accept Purchase Order.

License purchase with a quantity of 10 or above is considered a site

license. Below is the price break down for bulk purchases:

  1-9 licenses: 34/each

  10-19 licenses: 29/each

  20-49 licenses 27/each

  50-99 licenses: 25/each

   100 licenses: 23/each

For site license you can either purchase by credit card directly from our

website or by company check. To purchase online, visit

the purchase page. When a quantity value

larger or equal to 10 is entered, the price will be adjusted automatically

to the discount value.

You can also purchase by check and yes we do accept Purchase Order. Please

send an email to support junefabrics.com to start the PO process.

Since we use an activation system to validate license usage,

each phone will use up one license count so you MUST purchase

enough quantity to cover all phones.

How would I get charged for using PdaNet.

With default settings, PdaNet usage is treated as wireless data usage, same as usage from the

any network applications on your device. Air minutes phone usage will not apply.

Different cell phone carriers provide different wireless data plans.

For example Verizon provides National Access which is 1x based as well

as Wireless Broadband which is EVDO based.

On PdaNet version 2.x I receive connection error 3064.

This error indicates some problem connecting to your data service on the phone end.

Try to soft reset your phone and make sure you can browse the web on the phone directly.

Then connect PdaNet and see if it works.

On PdaNet version 2.x I receive connection error 3040.

On your computer bring up ActiveSync Connection Settings on Vista that is under WMDC,

then make sure Allow wireless connection on device when connected to desktop is checked

and Work network has been selected.

My phone is SMT5800 or Pantech Duo. PdaNet connects properly but browser fails to open any web pages.

Copy the following files to your phone and open them to install:

After the installation, soft reset the phone and tap the PdaNet icon, now uncheck Proxy Mode and save it.

Connect PdaNet and it should start working.

On XP when I launch PdaNet I got: Error 711.

Same cause as the following crash.

On Vista when connecting PdaNet it crashes and gives me an error PdaNetPC.exe has stopped working.

You got this error because some necessary system services have been turned off on your computer after Vista/XP is installed

either by you or by your system administrator and PdaNet is not allowed to create a dialup connection.

To fix this, go to Control Panel on your computer, select Administrative Tools then Services and turn back on all the Dialup or Remote connection related services In particular one named Remote Access Service.

Connection established successfully but drops after 1 or 2 minutes for no reason.

This can be caused by a few different reasons:

LAN connections on your computer might send data packets to the cellphone connection and cause the network to drop. You should go to Network Connections on the computer then right click and disable any LAN or Wireless Network connections.

If you have a Treo 700w or 700wx, try to run My Device Windows UsbSwitch.exe on the phone to switch between RNDIS and USB Serial,

then soft reset the phone and see if PdaNet works better afterwards.

Some applications on your phone might attempt to periodically connect to the Internet every few minutes, this will cause the PdaNet connection to drop. Examples for such type of programs are GoodLink, Wireless Sync, Trillian and Pocket Outlook. You need to change their settings to stop doing the auto connection when PdaNet is in use.

Certain network programs on your computer might also cause this to happen, for example VPN software that installs extra network service over the connection. Another example is Microsoft Groove and IBM Connect. Try to install and connect PdaNet on a different computer and see if you get the same problem.

I got error on the PC: Failed to create dialup entry.

On some XP system, PdaNet could be disallowed from creating a dialup entry for you automatically if there has not

been any dialup entries on your XP system. Try to manually create any entry in your network connections and the problem should go

away. Go to Control Panel - Network Connections -

select Create a New Connection from the left, allow the dialog to

continue until finished check Setup my connection

manually when prompted and enter any number as the phone number when prompted. After

this finishes you should have a junk dialup entry. Now try to launch PdaNet connection again and

it should connect.

Error: Unable to find device PdaNet modem on you machine, PdaNet not installed properly.

Reboot your PC and the problem should go away.

I got dialup error 691 state 6.

There could be different causes for this error. If you have recently swapped your phone or updated the firmware on the phone,

make sure you have called your carrier to

activate the data service on your phone. If PdaNet works for you before and you are getting the 691 error without any changes, then

most likely it is because you are out of the data service area and have weak data signals.

I got dialup error 720 state 6.

In most cases this error is caused by corrupted network configurations on your computer, especially if PdaNet works

for you before or on a different computer. It could be because of installation of some network or security software that impacts

dialup connections. Try to search for dialup error 720 on the Internet and you might be able find some suggestions

that could resolve the computer issue.

On a GSM phone, I got dialup error 734 state 6.

This problem is due to your cellphone service changing APN when you are not at your home area. You need to

manually specify the APN and user name/password to logon. To do this, click on the PdaNet tray icon on Windows and

select Settings- Specify username/password, then

If you are with Cingular, try to enter

Username : WAP CINGULARGPRS.COM

Password : CINGULAR1

APN : wap.cingular

Or

Username: ISPDA CINGULARGPRS.COM

Password: CINGULAR1

APN: isp.cingular

If you are with T-Mobile, try to enter

Empty username and password

APN : wap.voicestream.com

Now save the settings and try to connect again.

I got dialup error 31 state 5 on Vista.

This error indicates the RAS system is corrupted by Vista updates. To resolve the issue, you can either user System Restore back

to a date when PdaNet still worked, or you can uninstall PdaNet and run

this Microsoft Repair Tool, reboot and reinstall PdaNet.

I got dialup error: Error 633, 678 or 797 on Win2K with state 0

If you have a software called Zone Alarm version 6.0 installed, make sure you are at build number 6.0.667 or higher for XP Exiting Zone Alarm will not make the problem go away. If you have Windows 2000 you need to completely uninstall Zone Alarm and install 5.x. You can check the build number by clicking on the ZA tray icon and select About. The original build of Zone Alarm 6.0 is very buggy and will cause PdaNet to fail. This is fixed in build 667 on XP together with other Zone Alarm problems. See details at story1.

If you don t have Zone Alarm installed, the most likely cause for this is that your system mistakenly picks up the native modem on your PC when dialing.

You can resolve this by temporarily uninstalling the device driver of your native modem from

Panel- System- Hardware tab- Device Manager, right

click on the native modem and select uninstall or disable, then try to run PdaNet again to make sure it works.

If it does, you can re-install the driver for the native modem and the problem should not repeat.

This could also happen if your uninstallation failed to clean up the modem driver for some reason. To fix

this, go to Control Panel- System- Hardware tab- Device Manager button, expand the Modem tree and remove

whatever items with PdaNet in it. Then re-install PdaNet.

When I try to send email using a mail client such as Outlook Express I got SMTP server error, receiving email seems OK.

PdaNet provides your PC with full Internet access, however your email account is provided by your

email service. Some ISP such as EarthLink will only allow you to access the SMTP server for outgoing mail

if you dial up using their service.

Try to contact your ISP to see if there is an alternative SMTP server you can use which is not private, or you can access web mail

through the browser if they provide one. If they don t, maybe it is time to consider a free email service

such as Yahoo mail or Hotmail.

I got a message on my PC prompting me to pick up the handset and dial 777

and then press ok. I got audio message feature code you entered is not valid.

The cause of the problem is that you have selected to have Operator-Assisted Dialing for

some reason. To correct this, go to Network Dial-up and Connections, under menu Advanced,

uncheck Operator-Assisted Dialing. Then try to connect again like you did previously.

When I try to connect I receive error message: Please attach your device to the PC before connecting. My device is already connected to the computer s USB port.

First of all make sure the ActiveSync icon has turned green when you attach the device. Then after that both the PdaNet tray icon on the computer AND the one on your device side should change state from grey out to active. If the PdaNet icon does not become active, the two sides are not talking to each other. You can try to soft reset your device unplug and take out the battery then put it back and see if it makes any difference. Some third-party firewall programs such as Sygate or Norton Personal Firewall could also block PdaNet connections. You can try to turn it off.

When I try to connect again after a successful connection is dropped,

I receive error message: Modem Busy, please try to connect again.

This is usually because the previous connection was not terminated cleanly for some reason data connection stability issue etc.. When you get this problem, you can do a soft reset on your device unplug, take out the battery and put it back to clear it.

To avoid this problem, try to alway disconnect using the Disconnect menu of the standard network tray icon the one with two blinking screens on your

computer end.

I receive connection error code 17 : Please make sure PdaNet is running on your phone.

If you were able to use PdaNet previously on the same phone, then try to soft reset the phone and see if this error goes away.

Otherwise try to see if this helps: on the phone go to Settings- Connections- USB to PC and uncheck Advanced Functionarity on some phones this is called RNDIS, for

Treo 700w phones run My Device Windows UsbSwitch.exe instead then soft reset the phone.

I installed version 2.0 and VPN doesn t work.

This bug will be fixed in our next update. For now please install

this build instead. If this still doesn t work,

try to tap PdaNet on the phone end and uncheck Proxy Mode.

How much speed can I get with a PdaNet connection.

PdaNet should provide the same speed that your service allows.

CDMA services advertise maximum speed of 150kbps for 1x network and 2.4Mbps for EVDO. However

average speeds are much slower, sometimes 40kbps for 1x and 150kbps for

EVDO.

Does PdaNet support Mac/OS X.

PdaNet does not support USB tethering on Mac directly. However PdaNet does expose a standard Bluetooth DUN service which can be connected from Mac if it supports Bluetooth, although you still need to install and activate PdaNet through a Windows PC. You can see more details from Bluetooth setup. The other option is to use PdaNet through Parallel or Boot Camp on the Mac.

I previously purchased PdaNet for Palm OS based Treo, does my license cover PdaNet for Windows Mobile.

No it does not. PdaNet for Windows Mobile is a different product vs. the Palm OS version and will be

charged and maintained in parallel. The serial number you purchased for Treo 650 or lower will not work on

Windows Mobile or vice versa. However you will be able to get a 5 discount as a returning customer. Just

enter your old serial number when purchasing.

How do I register. Why haven t I received my registration code.

The trial download of PdaNet will expire in 7 days, otherwise is exactly the

same as the full version. You need to purchase a registration code matching your email

in order to unlock the full version there is no separate download after you purchase.

You will receive an order confirmation email within 24 business hours. If

you order it directly from our website, you should receive the email right away.

If you do not

receive your registration email in the above amount of time, please

let us know, the spam filter of your email

server might be blocking emails from our address.

To unlock PdaNet after you receive the registration code

might also be called serial number or license code in the email, click on the PdaNet

icon in the tray area on Windows click here if you don t

know where the tray icon goes

to bring up the popup menu and select Register, copy your email address or name if

that was what came in your receipt for older version of the software and registration

code from the order receipt email has to be exactly as is including spaces to unlock

the full version of PdaNet. Once registration confirmed, the Register menu will no longer

appear.

Warning: Do not try to use a pirate registration code or codes purchased by others and

do not give your code away to other people. There is an activation count on the license

and you might be locked out if other people use your license to activate their devices.

What is your refund policy.

Refunds are available for purchase of the Treo 700p version or the Windows Mobile version.

Refunds can only be processed within 14 days after the purchase.

The way we try to achieve customer satisfaction is by providing a cost-free, full-feature

7-day trial period so that potential customers can test it and make sure they are satisfied

before making the purchase. This is a typical way in shareware industry.

If I only purchase one copy of PdaNet, can I install it on multiple machines.

Although the license agreement mentions that one license only apply to one machine,

we do allow you to install the Desktop part of PdaNet on multiple PCs, given that you

only install the device part of the software on one Smartphone. That is,

you can use one device to connect to as many computers as you want.

I ActiveSync with my Desktop PC only but I want to use PdaNet on my laptop, what should I do.

Since PdaNet relies on ActiveSync to provide device connection. You do have

to put ActiveSync on whichever PC you will be using PdaNet.

The Dial-Up Connection box pops us when I try to use broadband on my PC.

This is due to the default Internet Options on your computer, which can be customized

easily. Simply launch Control Panel and go to Internet Options- Connections tab, from

there you can change the setting to Never dial a connection and the problem will go away.

How do I connect PdaNet to my phone through Wifi.

To connect PdaNet through a Wifi-capable phone, follow the instructions below:

Make sure your phone is not attached to the computer.

Setup Wifi connection between your computer and your phone. This can

either be a peer-to-peer ad-hoc connection without a router or an access point connection

through a router.

From your computer try to ping the IP address of your phone to make sure the Wifi

connection is working.

On the phone end, tap the PdaNet icon to bring up settings. At the bottom of the settings window

there is drop down list with No connection over Wifi and also the name of your computer. Select

it to allow this computer to connect to your phone. If you do not see your computer name in the

list, there might be problem with your Wifi connection.

If the computer can see the phone, the PdaNet tray icon should change to an

attached state after a few seconds. Now you can connect PdaNet from the computer side.

Detailed, step-by-step instructions for using the free PdaNet app to tether your Android phone and use it as a modem for your computer.

Connection Issues USB Mode PdaNet connection is established but I do not get Internet access on the computer end. Please check your phone and make sure PdaNet.

Big Download Portal. You can find and download evrething you want.

  • What is required to install PdaNet. Does it support Vista. On Windows XP/2000, PdaNet requires ActiveSync to be installed on your computer first.
  • What is required to install PdaNet. PdaNet works on all PalmOne/Handspring Treo phones, the PC part requires Windows Vista/XP/2000/ME/98SE. Also make sure you.

No more missed important software updates. UpdateStar 10 lets you stay up to date and secure with the software on your computer.

You can do this using PdaNet. From KnowYourMobile.com: To use your Milestone as a mobile broadband dongle, you will need: Motorola Milestone USB Drivers.